It turns out that there are also some rules for laying carpets. Laying carpets in this way will make your living room more beautiful

Nowadays, people prefer to lay carpets on the floor when decorating their homes. Whether it is the bedroom or the study, laying carpets will make the space beautiful and give people a quiet and comfortable feeling. Carpets will flatten the entire floor, but in the living room, block carpets are more preferred, which can embellish part of the space.

However, the laying methods of the two carpets are different, and the places they pay attention to will also be different. If you want the carpet to have a decorative effect while having a practical effect, the laying method of the carpet is more important.

1. Floor treatment

If the floor of your home is paved with wooden floors, places like the study and bedroom do not need special arrangements, but if it is a cement floor, you need to check whether there are bulges or potholes. If there are, you need to deal with them in time, and then rinse them with clean water. Wait until the floor is completely dry before laying the carpet on it.

2. Laying method

1. Unfixed

If you don't plan to fix the carpet, you can splice the cut carpet into a whole piece and then lay it on the ground. You don't need to stick it to the ground. You just need to trim it around. This laying method is more suitable for rooms where carpets are not often used.

2. Fixation

The spliced ​​carpet can be fixed directly on the floor of the room. Use double-sided tape to stick the carpet to the ground, or use wooden strips nailed up to the sky to clamp the back of the carpet around the house. It can play a fixed effect.

3. Splicing

If you like irregular-style carpets, you can use needle and thread to splice multiple carpets together when laying, or use tape to stick the carpets together, use an iron to melt the glue, and then press the carpet on it so that they can stick together firmly.

4. Operation sequence

1. Measure the size

The length of each room is different, so the carpet should be 5 cm longer than the length of the room. Its width should be calculated based on the size of the thread buckle on the edge of the carpet. When cutting, pay attention to the direction of the wool weaving of the interface carpet to be consistent with it to prevent the finished product from having a yin-yang side.

2. Fix and splice

The cut carpet can be fixed on one side first, and then fixed with a tensioner, and spliced ​​after adjusting the position. During the carpet laying process, pay attention to keeping the direction of the wool weaving consistent with the direction of light exposure to reduce the deformation caused by walking and affect the overall effect of the carpet in the later stage.

3. Trimming and cleaning

After the carpet is laid flat, trim along the wall, then clip the carpet into the prepared nails to fix it, seal it with a pressure strip, and use a vacuum cleaner to clean the surrounding area to ensure that the overall beauty and practicality are not affected.

5. Note the problem

Before laying the carpet, clean the floor, then lay the tape for carpet pasting flat, and stick the interface with tape to ensure that it will not affect its bonding effect.

The sudden change of the carpet and the intersection of the wall corners should be tightly attached to prevent gaps and warping of the edges. In addition, the pattern of the carpet joint should be kept consistent and the color should be the same. The joint position should be hidden but not exposed, which will make the overall aesthetics better.

It is easier to lay and clean block carpets at home than to lay them all over. However, the carpets with all over can avoid the trouble of sliding or dust accumulation at the bottom. However, the whole cleaning of the carpet is more laborious and time-consuming, so when decorating the floor at home.